Installing an overhead DVD Player in your Buick Rendezvous permits you to benefit from the freedom of road-tripping in an SUV while still bringing home entertainment with you on the road. The process for putting in the DVD Player requires using common family instruments and takes not than an hour of your time to finish, then you will be able to get pleasure from your favourite DVDs in your SUV.
Buick Rendezvous DVD Player Installation Instructions
1. Wedge some distance between the ceiling and the dome gentle of the SUV using a flathead screwdriver. Pull the dome light down from the ceiling. Once it’s loose, disconnect the wire harness. Push the wire harness up into the outlet within the ceiling.
2. Place the bracket part of the DVD player mount over the hole in the ceiling so it lies flat towards it, then hint across the bracket utilizing a carpenter’s knife to cut the headliner. Remove the mounting bracket and the headliner piece from the ceiling. Pull the wires down from the hole.
3. Pull the wire harness by the mounting bracket, then set the bracket back over the outlet in the ceiling. Drill threaded holes by means of the mounting bracket and into the ceiling using a drill with a machine tap drill bit. Insert the mounting screws into the freshly drilled holes and tighten them with a Phillips screwdriver. Then, plug the wire harness into the DVD participant and slide the player onto the bracket until it clicks into place.